Sàn giao dịch công nghệ; chợ công nghệ; chuyển giao công nghệ; thanh lý máy móc; dây chuyền công nghệ; hội chợ công nghệ

Sàn giao dịch công nghệ; chợ công nghệ; chuyển giao công nghệ; thanh lý máy móc; dây chuyền công nghệ; hội chợ công nghệ

Danh mục sản phẩm
Mới

Electrostatic Dust Meter

Giá 800 USD / Bộ

  • Xuất xứ
  • Mã sản phẩm
  • Bảo hành
  • Hình thức thanh toán
  • Điều khoản giao hàng
  • Điều khoản đóng gói
  • Thông tin khuyến mãi

Thông tin nhà cung cấp

Electrostatic Dust Meter

Features

☆ Adopt mixed signal processing method, strong anti-interference ability

☆ Easy to use  The dust contamination of the probe do not affect the measurement sensitivity,

☆ By intelligent successive approximation algorithm, it can adapt to more working conditions

Principle

Charge transfer occurs when two objects rub or touch.The device adopts accurate and reliable AC electrostatic measurement technology.When the dust particles pass through the sensor, the weak charges carried by the dust particles are collected by the sensor and sent to the processor. The processor converts the signal processing result into an output value that is linearly related to the dust content.

Model

PW-ESDM series

Operate temperature range

-20~60℃

Operate humidity range 

No condensation of 90%

Operate vibration environment

Maximum continuous oscillation, any direction, any frequency: ROOT mean square value 2g (20m/s²)

Operate electromagnetic field

Maximum: 60A/m at 50 Hz (equivalent to a 50AT magnetic field in a 1m x 1m square solenoids)

Operate environment protection

IP66/NEMA4 aluminum alloy housing, suitable for installation in non-corrosive environment, stainless steel probe

Pipeline gas pressure

-0.1~1MPa

Pipeline gas flow rate

1m/s~30m/s

Pipeline gas temperature

-50~450℃

Pipe outer diameter

0.1~4m

Probe structure

Standard probe is M6, 160 mm long, 316 stainless steel rod.

Dust particle range

Nominal 0.1μM ~ 200μM ( Particles exceed nominal range can be received but the signal characteristics are different )

Time zero drift

Less than 1% per year.

Temperature zero drift

Less than 1% over the specified temperature range

Time full scale drift 

Less than 1% per year.

Temperature full scale drift 

Less than 1% over the specified temperature range

Line stability

All parts of the system are made of high-stability electronic assemblies

Noise resistance

All 50/60 Hz audio & harmonics are filtered out before signal is received

Measure range

0-9/12/25/50/100/200/400/800/1000 mg/M³

Transmitter output mode

Two-wire 4 – 20mA (built-in isolator, explosion-proof & anti-interference)

Transmitter power

15V – 32VDC

Suzhou Pullwin Auto Technology Co.,LTD

Suzhou Pullwin Automation Technology Co., Ltd. is a company specializing in continuous emission online systems for flue gas. The company not only commit to product research and development, but also provides customers with professional solutions, integrating system solutions and professional after-sales service, aiming to truly solve substantive problems for customers.

Our product ranges:

Pre-processing spare parts:

---Filter

---Heating line

---Dew point alarm

---Dilution componen

---Pumps

---Joints

Pre-processing Equipment

---Sampling Probe ( Fixed type, portable type,dilution type)

---Gas cooler(filxed cooler,Portable cooler)

---NH3 removal system

---Dust meter

Gas Analyzer

--- UV analyzer

--- Infrared analyzer

--- NOx analyzer

--- Hygronom

Compressed air treatment

-- Quadruple filter,

---Heatless dryer

We have always believed that quality is the life of a company. It is our constant pursuit to provide users with good using experience and complete solution. From automation control, CEMS system, pre-processing system, pre-processing components, we has always been practicing quality, experience and solutions.

Sản phẩm đã xem